- 13 -
1. Basic Operations
Adjusting Volume
The volume of the sounds which are emitted in the following conditions can be adjusted in
four levels.
• When a button or key on the operator panel is pressed
• When copying is complete
• Fax communication is complete
• When a paper jam occurs
• AirPrint Buzzer Volume
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the or button repeatedly to select [Manage Unit] and press the
button.
5
Press the or button repeatedly to select [Sound Control] and press the
button.
6
Press the or button to select the item whose volume you want to adjust
and press the (OK) button.
7
Press the or button to select the volume level and press the (OK)
button.
To Next Page
Loading...
Need help?
General
