- 166 -
5. Fax
Set when the external telephone and the machine ring in Tel/Fax Ready mode.
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [Fax Setup] and press the button.
5
Press the or button to select [Fax Setting] and press the button.
6
Press the or button repeatedly to select [Tel Priority Mode] and press
the button.
7
Press the or button to select [ON] and press the (OK) button.
•
[ON]: The sender is assumed to make a voice call. The telephone rings early.
•
[OFF]: The sender is assumed to send a fax. When the machine determines that the
sender wants to make a voice call, the telephone rings.
8
Press the button until the home screen is displayed.
Set the machine so that it can determine whether the sender is sending a fax while the
recipient is holding the handset of the external telephone after picking it up to answer the call
when the telephone rings in Tel/Fax Ready mode.
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [Fax Setup] and press the button.
5
Press the or button to select [Fax Setting] and press the button.
6
Press the or button repeatedly to select [CNG Detection] and press the
button.
7
Press the or button to select [ON] and press the (OK) button.
•
[ON]: The machine detects fax beep signals, and then automatically starts receiving
a fax.
•
[OFF]: If the sender is sending a fax, the machine receives a fax with manual
reception.
8
Press the button until the home screen is displayed.
Setting When to Ring the External Telephone (Tel Priority
Mode)
Setting Fax Detection Mode