- 434 -
11. Utility Software
If there is a device that is connected via a network and registered in OKI LPR Utility, you can
download the print data.
1
Start OKI LPR Utility.
2
Select a device.
3
Select the device to which the data is downloaded.
4
Select [Download] from [Remote Print].
5
Select a file, and then click [OK].
The file is sent to the machine.
You can use OKI LPR Utility to delete unnecessary print jobs.
1
Start OKI LPR Utility.
2
Select a device.
3
Select [Job Status] from the [Remote Print] menu.
4
Select a job to delete.
5
Select [Delete Job] from the [Job] menu.
Sending a File to a Device That is Registered in OKI LPR Utility Deleting an Unnecessary Print Job
To Next Page
Loading...
Need help?
General
