- 131 -
5. Fax
This section describes how to check the received fax.
A received fax is automatically printed. You can specify a paper tray to use.
Specifying a Tray to Be Used When Printing Received Fax
Paper Size Priority
• Do not pull the paper tray out during printing.
• Even if the machine cannot print received faxes due to a lack of paper or paper jams, the machine can receive data
of up to 8192 sheets. (However, this amount varies depending on the remaining memory space or document
content.) If the machine cannot print received faxes due to a lack of paper or paper jams, refer to the following items
to solve a problem. If the problem is solved, printing automatically starts.
Loading Paper (User's Manual)
If Paper Jams Occur (User's Manual)
• Use plain or recycled paper.
• If a received fax is larger than a specified paper size, the fax is reduced, discarded, or printed onto multiple sheets
of paper depending on the reception print settings.
Setting a Print Method for When a Received Image Exceeds Paper Size
1
Press the (SETTING) button on the operator panel.
2
Press the button to select [Paper Setup] and press the button.
3
Press the or button to select [Select Tray] and press the button.
4
Check that [Fax] is selected, and then press the button.
5
Press the or button to select the paper tray, and then press the
button.
6
Press the or button to select the value you want to set and press the
(OK) button.
•
The paper tray with [ON(Prior)] set is used ahead of another tray that holds paper of
the same size.
•
The MP tray is set to [OFF] by factory default.
•
If there is a tray which is set to [ON] or [ON(Prior)], “---” is displayed as the setting
value.
You cannot set all the trays to [OFF].
7
Press the button until the home screen is displayed.
Receiving a Fax Specifying a Tray to Be Used When Printing Received Fax
To Next Page
Loading...
Need help?
General
