- 253 -
7. Troubleshooting
• The operation of the machine
If a power failure occurs, the machine operates as follows.
• If a power failure occurs, the machine is turned on, it will turn on automatically without pressing the power switch after
the power is restored.
If you do not want the machine to turn on automatically after the power is restored, press the (SETTING)
button on the operator panel and select [Admin Setup]> [User Install] > [Power Setup] > Set [Power Supply Return]
to [Manual].
• The operation that uses an uninterruptible power supply (UPS) or inverter is not guaranteed. Do not use an
uninterruptible power supply (UPS) or inverter.
• Stored fax data
• Backing up data in memory
The image data stored in the memory is retained even if a power failure occurs or you turn
the machine off.
• Erased report
If the fax data in memory is lost, an erased report is printed automatically.
The following documents are eligible for an erased report.
- Fcode Box Document
- Documents received in memory
An erased report informs you of the following items of deleted data.
- Document type
- Fcode box number
- Fcode box name
- Destination name
- Fcode confidential communication/Fcode bulletin board communication
- Time when communication started
- Number of received pages
If a fax is received with the manual reception, Fcode polling reception, or Fcode confidential reception, its reception
type is also printed.
If a Power Failure Occurs
Machine's Status Operation
During a call You can continue talking.
During a transmission The transmission stops halfway.
When the power is restored,
• If a memory transmission is used, the machine automatically retransmits from
the page on which the transmission stopped.
• If a real time transmission is used, the machine does not send the data again.
Set the document, and then specify the destination again to start the
transmission.
During a reception The reception stops halfway.
If the machine received one or more pages, the erased report is printed after the
power is restored. A received image is not printed.
Copying or printing a list Printing stops halfway.
When the power is restored, start the print job again.
Standby You cannot start another copy, fax, scan, or print job.
You also cannot receive another fax.
To Next Page
Loading...
Need help?
General
