- 406 -
11. Utility Software
Set the length of idle time before entering Auto Power Off.
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine from [Registered Device Table].
3
Click the [Device Setting] tab.
4
Click [Menu settings].
5
Click (Display administrator settings).
6
Enter the administrator password, and then click [OK].
The factory default password is "999999".
7
Click in order of [Admin Setup] > [Management] > [Power Save].
8
Select the transition time from [Auto Power Off Time], and then click (Save
to device).
Before using the Scan To Shared Folder function, register a created shared folder to the
machine as a destination.
When you perform Scan To Shared Folder, send data to the profile that you specify as a
destination.
Up to 50 profiles can be registered.
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine from [Registered Device Table].
3
Select the [User Setting] tab.
4
Click [Profile Manager].
Setting Auto Power Off Mode (Configuration Tool) Registering a Destination (Profile) (Configuration Tool)
To Next Page
Loading...
Need help?
General
