- 215 -
6. Maintenance
12
Select [Yes] on the confirmation screen, and press the (OK) button.
The machine reboots and the standby screen appears.
You can return the configured settings of the device to their default.
• When you initialize the settings of the device, the following data is deleted.
- Stored documents in the Fcode bulletin board box
- Fax jobs that have not been sent
- Fax jobs received in the Fcode confidential box
- Dialing logs
- E-mail logs
- Received fax data (including image received with Secure Receive)
- JOB MACRO
• The following settings will return to the factory default settings.
- Admin Password
- Paper Setup settings
- Copy Setup settings
- Fax Setup settings
- Fcode Bulletin Board settings
- Scanner Setup settings
- Print Setup settings
- Network Setup settings
- Management settings
- User Install settings
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the or button repeatedly to select [Manage Unit] and press the
button.
5
Press the or button to select [Reset Settings] and press the button.
6
When [Execute] is displayed, press the button.
Initializing the Settings of the Device
To Next Page
Loading...
Need help?
General
