- 174 -
5. Fax
You can store only one document in an Fcode bulletin board box of the machine. The saved
document is overwritten by a new document. To store a document, you must register a
bulletin board box in advance.
Registering an Fcode Box
1
Set a document in the ADF or on the document glass.
2
Press the (SETTING) button on the operator panel.
3
Press the or button to select [Store Document Settings] and press the
button.
4
Check that [Store] is selected, and then press the button.
5
Select [Fcode Bulletin Board] and press the button.
6
Press the or button to select the number of the box in which you want
to save a job and press the button.
7
Select [Over Write], and then press the (OK) button.
8
Check that [Yes] is selected on the confirmation screen, and press the (OK)
button.
A document that is stored in an Fcode bulletin board box is not deleted even if the recipient retrieves the document.
You can delete a document that is saved in a bulletin board box.
1
Press the (SETTING) button on the operator panel.
2
Press the or button to select [Store Document Settings] and press the
button.
3
Press the button to select [Delete] and press the button.
4
Select [Fcode Bulletin Board] and press the button.
5
Press the or button to select the number of the box in which you want
to save a job and press the button.
6
Check that [Yes] is selected on the confirmation screen, and press the (OK)
button.
A document that is stored in an Fcode bulletin board box is not deleted even if the recipient retrieves the document.
Saving a Document in a Bulletin Board Box of This Machine Deleting a Document in a Bulletin Board Box of This Machine
To Next Page
Loading...
Need help?
General
