- 410 -
11. Utility Software
2
Select the machine to which you want to import the profiles from [Registered
Device Table].
3
Select the [User Setting] tab.
4
Click [Profile Manager].
5
Enter the administrator password, and then click [OK].
The factory default password is "999999".
6
Click (Import from file).
7
Select the file to import, and then click [Open].
8
Select the settings to import, and then click [Import].
9
Click (Save to device).
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine from [Registered Device Table].
3
Select the [User Setting] tab.
Deleting a Destination (Profile) (Configuration Tool)
To Next Page
Loading...
Need help?
General
