Orolia VersaSync User Manual

4.
Apply your changes and click Submit. OR: Click Delete to remove the User.
2.8.7.3 SNMP Traps
SNMP traps allow for automatic event notification, and as such are one way to remotely
monitor VersaSync's status.
SNMP traps indicate the status change that caused the trap to be sent and may also
include one or more objects, referred to as variable-bindings, or varbinds . A varbind
provides a current VersaSync data object that is related to the specific trap that was sent.
For example, when a Holdover trap is sent because VersaSync either entered or exited the
Holdover mode, the trap varbind will indicate that VersaSync is either currently in Holdover
mode or not currently in Holdover mode.
For testing purposes, a command line interface command is provided. This command,
testevent, allows one, several, or all of the traps defined in the VersaSync MIB to be gen-
erated. Refer to "CLICommands" on page272 for command details.
To define SNMP Traps (Notifications):
1.
Navigate to MANAGEMENT > NETWORK: SNMP Setup.
2.
In the SNMP Traps panel, click the PLUS icon in the top-right corner.
3.
The SNMP Traps Settings window will display:
94
CHAPTER 2 • VersaSync User Manual Rev. 7.0
2.8 Configuring Network Settings

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English