7.
The SNMP trap you created will appear in the SNMP Traps panel:
Each row of the SNMP Traps panel includes the version of the SNMP functionality,
the User/Community name for the trap, the IP address/Hostname of the SNMP
Manager and values applicable only to SNMP v3, which include the Engine ID, the
Authorization Type, the Privilege Type.
You may define different SNMP Managers to whom SNMP traps can be sent over
the network. This allows for SNMP Managers in different geographical areas to
receive the same SNMP traps.
Note: Spectracom has been assigned the enterprise identifier 18837
by the IANA (Internet Assigned Numbers Authority). Spectracom’s
product MIBs reside under the enterprise identifier @18837.3.
For detailed descriptions of the objects and traps supported by the VersaSync,
please refer to the Spectracom VersaSync MIB files. See "Accessing the SNMP Sup-
port MIB Files" on page89.
2.8.8 System Time Message
The System Time Message is a feature used for special applications that require a once-
per-second time message to be sent out by VersaSync via multicast. This time message will
be transmitted before every 1PPS signal, and can be used to evaluate accuracy and jitter.
To set up and enable a System Time Message:
1.
Navigate to MANAGEMENT > OTHER > System Time Message.
2.
Populate the fields Multicast Address, Port Number and Message ID, and click
Submit.
96
CHAPTER 2 • VersaSync User Manual Rev. 7.0
2.8 Configuring Network Settings
To Next Page
Loading...
Need help?
General