Orolia VersaSync User Manual

To download current logs, click DOWNLOAD LOGS.
Broadshield Notifications
You can setup Notifications to be sent if BroadShield detects or clears an alarm:
Navigate to MANAGEMENT: OTHER > Notifications, and under the GPS tab, loc-
ate the two BroadShield line items. For further information on how to configure Noti-
fications, see "Notifications" on page209.
3.3.3 The GNSS Reference
With most applications, VersaSync will be setup such that it utilizes a GNSS signal as the
primary (if not the only) timing reference.
VersaSync's GNSS receiver utilizes the signal provided by the GNSS antenna.
The GNSS receiver analyzes the incoming GNSS data stream and supplies the GNSS time
and 1PPS (Pulse-Per-Second) signal to VersaSync's timing system. The timing system uses
the data to control the System Time and discipline the oscillator.
While VersaSync’s default GNSS receiver configuration will likely be adequate for most
applications, it is advisable that you review the options and change settings as needed, par-
ticularly if you are experiencing poor signal reception.
3.3 Managing References
CHAPTER 3 • VersaSync User Manual Rev. 7.0
171

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English