2.1 SAFETY
Table 2-1:
Safety symbols used on this product or in this document
Symbol Signal word Definition
DANGER!
Potentially dangerous situation which may lead to per-
sonal injury or death! Follow the instructions closely.
CAUTION!
Potential equipment damage or destruction!
Follow the instructions closely.
NOTE
Tips and other useful or important information.
ESD
Risk of Electrostatic Discharge!
Avoid potential equipment damage by following ESD Best
Practices.
CHASSIS GROUND
This symbol is used for identifying the functional ground
of an I/O signal. It is always connected to the instrument
chassis.
Analog Ground
Shows where the protective ground terminal is con-
nected inside the instrument. Never remove or loosen
this screw!
Recycle
Recycle the mentioned components at their end of life.
Follow local laws.
2.1.1 SAFETY: Before You Begin Installation
This product may constitute a risk to the operator or installation/maintenance personnel, if
used under conditions that must be deemed unsafe, or for purposes other than the
product's designated use, which is described in the introductory technical chapters of this
guide.
DANGER! If the equipment is used in a manner not specified by the man-
ufacturer, the protection provided by the equipment may be impaired.
Before you begin installing and configuring this product, carefully read the following import-
ant safety statements. Always ensure that you adhere to any and all applicable safety warn-
ings, guidelines, or precautions during the installation, operation, and maintenance of your
product.
24
CHAPTER 2 • VersaSync User Manual Rev. 7.0
2.1 SAFETY
To Next Page
Loading...
Need help?
General