3.
Copy the text of the Certificate that was issued to you by your Certificate Authority,
and paste it into the text field.
4.
Click Submit to upload the Certificate to VersaSync.
NOTE: The text inside the text field under the Edit X.509 PEM Certificate tab is editable.
However, changes should not be made to a Certificate once it is imported; instead, a new
Certificate should be requested. An invalid Certificate may result in denial of access to the
VersaSync through the Web UI.
2.8.5.8 Uploading an HTTPS Certificate File
Once the HTTPS Certificate has been issued by your Certificate Authority, you have to
upload the Certificate file to VersaSync, unless it is a X.509 PEM-format Certificate: In this
case you may also upload the pasted Certificate text directly, see "Uploading an X.509
PEM Certificate Text" on the previous page.
Note: For more information about Certificate formats, see "Supported Cer-
tificate Formats" on page71.
To upload an HTTPS certificate file to VersaSync:
1.
Store the Public Keys File provided to you by the Certificate Authority in a location
accessible from the computer on which you are running the WebUI.
2.
In the WebUI, navigate to MANAGEMENT > NETWORK: HTTPS Setup.
3.
Select the tab Upload Certificate File.
78
CHAPTER 2 • VersaSync User Manual Rev. 7.0
2.8 Configuring Network Settings
To Next Page
Loading...
Need help?
General