Orolia VersaSync User Manual

1.7 VersaSync Specifications
The specifications listed below apply to the current base model, during “normal” operation,
with VersaSync synchronized to valid Time and 1PPS input references.
1.7.1 Supply Power
Operating Power and Standby Power: 10 to 32 V
DC
Power draw:
Operating: 10 W typical
Standby: 0.4W
This product is not intended to operate above 32V
DC
; power sources with transient
voltage spikes and surges above 32V require an external power conditioner/power filter to
ensure safe operation.
1.7.2 GNSS Receiver
VersaSync has an integrated state-of-the-art GNSS receiver, suitable for concurrent dual-
constellation reception.
Compatible signals:
GPS L1 C/A (center frequency 1575.42 MHz)
GLONASS L10F (center frequency 1602.0 MHz)
Galileo E1 B/C (center frequency 1575.42 MHz)
QZSS L1-SAIF (center frequency 1575.42 MHz)
BeiDou B1 (center frequency 1561.098 MHz)
Satellites tracked: Up to 72 simultaneously
Update rate: up to 2Hz (concurrent)
Acquisition time: Typically <27seconds from cold start
Antenna requirements: Active antenna module, +5V, powered by VersaSync, 16dB gain
minimum
Antenna connector: SMA
16
CHAPTER 1 • VersaSync User Manual Rev. 7.0
1.7 VersaSync Specifications

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English