Smart Card
<Only for model with Smart Card slot/2nd Smart Card slot>
You need software to use a Smart Card.
IMPORTANT
l
Do not:
l
Hit, bend, or drop the card.
l
Touch the contact part with fingers or metal object.
l
Place the card in very hot location for a long time.
l
Remove the card immediately after inserting it.
Inserting/Removing the Smart Card
Inserting the card
1. Slide the latch (A) to the arrow direction.
2. Slide the latch (A) down to unlock the cover.
3. Open the cover (B).
4. Insert the Smart Card until it surely fits in the slot.
l
Smart Card must be inserted with the chip portion (C) facing up.
5. Close the cover (D) until it clicks.
To Next Page
Loading...
Need help?
General