Contactless Smart Card Reader
<Only for model with Contactless Smart Card Reader>
You can read the data from RFID (Radio Frequency Identification) tags / Contactless Smart Card.
Precautions
NOTE
l
This reader is typically used with specialized applications. For further information, ask the system administrator.
l
Contactless Smart Card Reader Location
1. Aim the center of RFID tag / Smart Card at the Contactless Smart Card Reader.
l
Continue operation by using the specialized applications.
NOTE
l
Wave cards one at a time. If multiple cards are waved simultaneously, proper reading will not be possible.
l
If the chip device is held outside of the contactless smart card reader area or at an angle, or waved incorrectly, proper reading
may not be possible.
l
Operation distance depends on RFID tag / Smart Card.
To Next Page
Loading...
Need help?
General