Polycom realpresence group series User Manual

Using a Polycom RealPresence Group Series Remote Control
Polycom, Inc. 18
Show Content from a Computer Connected to RealPresence Group
System
Before you show content, check that the computer video output is configured to use one of these supported
resolutions and refresh rates.
For best video quality, use refresh rates of 60 Hz or less.
Note: The way you set the resolution and refresh rate differs, depending on the type of operating system
you have. Check your computer's manual or help topics for the appropriate steps.
To start showing content from a source connected to a RealPresence Group system:
» Using your remote control, select and then select your content source from the list.
While in a call, you can press > Select on your remote to turn on and off the last used content
source.
Polycom People+Content IP
The People+Content IP application allows you to send content from a computer that is not connected
directly to the RealPresence Group system or Polycom touch devices.
Keep the following points in mind about People+Content IP:
● People+Content IP provides video-only content. No audio is shared.
● People+Content IP supports any computer desktop resolution with color set to 16-bit or higher.
● Your computer resolution can be set to anything, but People+Content IP scales the image to
1024x768 or 1280x720.
Note: For a computer connected directly to the RealPresence Group system, Polycom recommends
using the Send Computer button or Content button instead of People+Content IP.
Resolution Refresh rates (Hz)
800 x 600 56, 60, 72, 75, 85
1024 x 768 60, 70, 75, 85
1280 x 720 50, 60
1280 x 768 60
1280 x 1024 60, 75
1600 x 1200 60
1680 x 1050 60
1920 x 1080 60
1920 x 1200 60

Polycom realpresence group series Specifications

General

Brand	Polycom
Model	realpresence group series
Category	Conference System
Language	English