Using the Touch User Interface
Polycom, Inc. 45
Content
You can show one content source and one people video source at a time, and you can switch to a different
type of content or people video source if you need to. Participants at other sites can also show content or
people video sources. If a contact starts sharing content, that content overrides any content currently being
shared.
When you are sharing content, a message displays on the monitors. You can show the following types of
content to far-end systems you are in a call with any of the following:
● Content sent using the Polycom
®
People+Content™ IP application (installed on a computer)
● Content annotated in the VisualBoard application
● Any information stored on a computer or USB flash drive connected directly to the system
● Content sent using the SmartPairing feature in Polycom
®
RealPresence
®
Desktop or RealPresence
®
Mobile applications. For information on using SmartPairing, refer to the RealPresence Desktop and
RealPresence Mobile documentation at support.polycom.com.
You can also receive and annotate content from a Lync or Skype for Business client.
Polycom People+Content IP
The People+Content IP application enables you to send content from a computer that is not connected
directly to the system using the system's IP address.
Keep the following points in mind about People+Content IP:
● People+Content IP provides video-only content; no audio is shared.
● People+Content IP supports any computer desktop resolution with color set to 16 bits or higher.
● People+Content IP scales the content image to 1024x768 or 1280x720 regardless of your computer's
resolution settings.
Download and Install People+Content IP
You need to download and install the People+Content IP application on a computer before you can use it
to show content.
1 On a computer, go to the Polycom People+Content IP page.
2 Under Resources, download the People+Content IP software for Mac or PC.
3 Extract the contents of the .zip file and launch the installer. Follow the instructions in the installation
wizard.
Share Content with People+Content IP
After you download and install People+Content IP, you are ready to share content.
1 On your computer, launch the application.
To Next Page
Loading...
Need help?
General
