Polycom realpresence group series User Manual

Using a Polycom RealPresence Group Series Remote Control
Polycom, Inc. 28
Cameras
You can adjust available cameras in several ways.
Select Cameras
You can use the remote control to select and adjust the main camera or other near-end or far-end video
sources.
You might be able to adjust other auxiliary cameras that support pan, tilt, and zoom movement. You can
adjust a far-end camera only in a call and only if the far end allows it.
TASK
1 Navigate to Camera > Select Camera.
2 Then select Near Cameras for near-end control or Far Cameras for far-end control.
Adjust Cameras
After you select a camera, you can make some adjustments to enhance the view.
Note: Before you can adjust the EagleEye Director camera, you must turn camera tracking off.
To adjust a Polycom EagleEye III, Polycom EagleEye IV, Polycom EagleEye Acoustic, or
Polycom EagleEye Director using the remote control:
TASK
1 Select either a near-end or far-end video source to control.
During a multipoint call being hosted by a system in the call, you can adjust a camera only at the far
end that has a current speaker.
2 Press the navigation buttons on the remote control to move the camera up, down, left, or right.
3 On the remote control, press to zoom out or to zoom in.
Switch Between Cameras
You can switch to controlling the far-end camera or the near-end camera in a call.
TASK
1 Press .
2 Select Camera, then select Near Camera or Far Camera.
Allow the Far-End System to Control Your Camera
If your system administrator has allowed access to user settings, you can let the far-end system control your
camera.
If their systems support presets, far-end participants can also set and use presets for your camera.

Polycom realpresence group series Specifications

General

Brand	Polycom
Model	realpresence group series
Category	Conference System
Language	English