Model-Specific Information
This section explains how you can identify the region your machine belongs to.
There is a label on the front cover of the printer, and it is located in the position shown below. The label
contains details that identify the region your machine belongs to. Read the label.
The following information is region-specific. Read the information under the symbol that corresponds to the
region of your machine.
(mainly Europe and Asia)
If the label contains the following, your machine is a region A model:
•
CODE XXXX -22, -27
• 220-240V
(mainly North America)
If the label contains the following, your machine is a region B model:
•
CODE XXXX -11
• 120-127V
• Dimensions in this manual are given in two units of measure: metric and inch. If your machine is a
Region
A model, refer to the metric units. If your machine is a Region B model, refer to the inch units.
Machine Types
This printer comes in two models that have different printing speeds.
When describing procedures that are model-specific, this manual refers to the different printer models as
Type 1 or Type 2. The following table describes the model types.
7
To Next Page
Loading...
Need help?
General