Host Interface Menu
You
can set configurations about network connections and communication when using parallel connection
between the printer and the computer. The changed configuration holds even if the printer is turned off.
Host Interface Menu Parameters
This section explains parameters that can be set on the host interface menu.
I/O Buffer
Select the size of I/O Buffer. Normally it is not necessary to change this setting.
Default: [128 KB]
•
128 KB
• 256 KB
I/O Timeout
Specify how many seconds the printer should wait before ending a print job. If printing operation is
frequently interrupted by data from other ports, you can increase the timeout period.
Default: [15 seconds]
• 10 seconds
• 15 seconds
• 20 seconds
• 25 seconds
• 60 seconds
Network
You can make network-related settings. For details, see "Configuration", Hardware Guide.
Machine IPv4 Address
Select whether to set the IPv4 address automatically or manually.
Default: [Auto-Obtain (DHCP)]
• Auto-Obtain (DHCP)
When DHCP is set to on, the IPv4 address, subnet mask address, and gateway address
cannot be changed. To change them, set DHCP to off. Contact your administrator for
information about the network configuration.
• Specify
• IP Add.
Manually specify the IPv4 address.
4. Making Printer Settings Using the Control Panel
128
To Next Page
Loading...
Need help?
General