Parameter Value configured
domain "character string" You can specify the login domain name for the
Radius server.
Usable characters: ASCII 0x20-0x7e (31 bytes)
other than "@". The default is blank.
password "character string" You can specify the login password for the
Radius server.
Usable characters: ASCII 0x20-0x7e(128
bytes). The default is blank.
srvcert {on | off} You can set the server certificate. The default is
"off".
imca {on | off} You can enable or disable the certificate when
the intermediate certificate authority is present.
The default is "off".
srvid "character string" You can set the server ID and sub domain of the
certificate server.
connectinfo Obtains connection information.
clear {a each command|all} Returns the selected setting to its default value.
If
you specify "all", all settings will be restored to
their default values.
miccheck {on|off} You can enable or disable the MIC check
function.
The default setting is "On" (enabled).
If you specify "Off", you cannot perform MIC
checks.
We recommend you specify "On" for the
MIC check function when using this printer.
• You can use this command only when the Wireless LAN interface unit is installed.
wins
Use the "wins" command to configure the WINS server settings.
2. Remote Maintenance Using telnet
76
To Next Page
Loading...
Need help?
General