10. Appendix
This chapter describes supervisor operations, administrator settings, user access to settings and log settings.
Supervisor Operations
The supervisor can delete an administrator's password and specify a new one.
If
any of the administrators forget their passwords or if any of the administrators change, the supervisor can
assign a new password. If logged in using the supervisor's user name and password, you cannot use normal
functions or specify defaults.
Log in as the supervisor only to change an administrator's password.
• The default login user name is "supervisor" and the login password is blank. We recommend changing
the login user name and login password.
• When registering login user names and login passwords, you can specify up to 32 alphanumeric
characters and symbols. Keep in mind that user names and passwords are case-sensitive.
• Be sure not to forget the supervisor login user name and login password. If you do forget them, a
service representative will to have to return the printer to its default state. This will result in all data in
the printer being lost and the service call may not be free of charge.
• You cannot specify the same login user name for the supervisor and the administrators.
•
Using Web Image Monitor, you can log in as the supervisor and delete an administrator's password
or specify a new one.
Logging in as the Supervisor
1. Log in to Web Image Monitor as an administrator.
2. Enter the login user name and password, and then click [Login].
When
you assign the administrator for the first time, enter “supervisor”, and leave the password empty.
The Web browser might be configured to auto complete login dialog boxes by retaining user names
and passwords. This function reduces security. To prevent the browser retaining user names and
passwords, disable the browser's auto complete function.
Logging out as the Supervisor
If administrator authentication has been specified, be sure to log out after completing settings.
143
To Next Page
Loading...
Need help?
General