Ricoh Aficio SP 5200DN User Manual

10. Enter the address, and then press the [OK] key.
Change the IP address from "11.22.33.44" to an IP address supported by your network.
11. Use the same method to assign the subnet mask and gateway address.
12. Press the [ ] or [ ] key to select [Specify], and then press the [OK] key.
13. Press the [Menu] key to return to the initial screen.
14. Print a configuration page to confirm the settings.
• For details about printing the configuration page, see p.44 "Test Printing".
Receiving an IP Address Automatically (DHCP)
Follow this procedure to set the printer to receive an IP address automatically using DHCP. The DHCP
feature is active by default, so this procedure is only required if you have changed the default settings.
• When [Auto-Obtain (DHCP)] is selected, you cannot configure the IP address, subnet mask, or
gateway address.
•
Consult your network administrator for information about configuring network settings.
5. Configuration
78
5

Ricoh Aficio SP 5200DN Specifications

General

Brand	Ricoh
Model	Aficio SP 5200DN
Category	Printer
Language	English