3. Under "Device Settings", click [Auto E-mail Notification].
The dialog box for making notification settings appears.
4. Make the following settings:
• Notification Message: You can set this according to your needs, for example, the printer's
location, service representative contact information.
• Items in the Groups to Notify column: E-mail notification addresses can be grouped as required.
• Items in the Select Groups/Items to Notify column: Select groups for each notification type, such
as printer status and error.
To make detailed settings for these items, click [Edit] next to "Detailed Settings of Each Item".
5. Click [OK].
6. Click [Logout].
7. Quit Web Image Monitor.
• For details about Web Image Monitor, see p.139 "Using Web Image Monitor".
•
For details about the settings, see Web Image Monitor Help.
On-demand E-mail Notification
1. Log in to Web Image Monitor as an administrator.
For details about logging in, see p.143 "Access in the Administrator Mode".
2. In the menu area, click [Configuration].
3. Under "Device Settings", click [On-demand E-mail Notification].
4. Make the following settings:
•
Notification Subject: Enter a text string to be added to the subject line of return e-mails.
• Notification Message: You can set this according to your needs, for example, the printer's
location, service representative contact information.
• Restriction to Device Status Info.: Select whether or not to allow access to the information such
as the printer settings and status.
• Items in the Receivable E-mail Address/Domain Name Settings column: Enter an e-mail address
or domain name to use for requesting information by e-mail and to receive its return e-mail.
5. Click [OK].
6. Click [Logout].
7. Quit Web Image Monitor.
5. Monitoring and Configuring the Printer
154
To Next Page
Loading...
Need help?
General