Memory Erase Status Menu
Displays data status inside the memory.
• The Memory Erase Status menu can be displayed only if all the following conditions are met:
• The
optional hard disk and the SD card provided with the hard disk are installed (Type 1 model
only).
• [Auto Erase Memory Setting] is enabled.
Viewing the Status of Remaining Data in Memory
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [Memory Erase Status], and then press the [OK] key.
3. The current memory status is displayed.
[Data to erase remaining.] : Data remain inside the memory.
[Currently no data to erase.] : No data remain inside the memory.
[Erasing Data...] : Data are being deleted.
4. Press the [OK] key.
5. Press the [Menu] key.
Memory Erase Status Menu
91
To Next Page
Loading...
Need help?
General