Test Printing
Follow the procedure below to print the configuration page.
• The
configuration page is printed on A4 or Letter (8
1
/
2
"×11") size paper, so load them in the same
paper tray.
Printing a Configuration Page
Use the following procedure to print the Configuration Page.
1. Press the [Menu] key.
2. Press the [ ] or [ ] key to select [List/Test Print], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Config. Page], and then press the [OK] key.
After the configuration page is printed out, the screen returns to List/Test print menu.
4. Press the [Menu] key.
Interpreting the Configuration Page
The meanings of the items on the Configuration Page are as follows:
System Reference
Machine ID
Shows the serial number assigned to the board by its manufacturer.
Total Memory
Shows the total memory status.
Total Counter
Shows the total number of pages printed by the printer to date.
4. Making Printer Settings Using the Control Panel
104
To Next Page
Loading...
Need help?
General