• The default is 255.
Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname | location}
• cname
Reset the computer name. The default computer name will be displayed when the computer is
restarted.
• location
Reset the location information. The previous location information will be deleted.
Interface configuration
msh> bonjour linklocal "interface_name"
• If many types of interface are installed, configure the interface that communicates with linklocal
address.
• If you do not specify an interface, the Ethernet interface is automatically selected.
• wlan can be specified only when the Wireless LAN interface unit is installed.
Interface Interface configured
ether Ethernet interface
wlan Wireless LAN interface
Setting IPP-SSL printing
msh> bonjour ippport {ipp|ssl}
• If IPP-SSL Printing is set to ssl, the IPP port number will appear as 443, and IPP-SSL printing can
be performed with higher security.
• If IPP-SSL Printing is set to ipp, the IPP port number will appear as 631. Port 631 is the port for
normal IPP printing.
devicename
Use the "devicename" command to display and change the printer name.
View settings
msh> devicename
Printer name configuration
msh> devicename name "string"
Using telnet
45
To Next Page
Loading...
Need help?
General