Installing the Device Certificate (Certificate Issued by a Certificate Authority)
This can be specified by the network administrator.
Enter the device certificate contents issued by the certificate authority. Installation of the certificate is
especially necessary for users who want to print via IPP -SSL from Windows Vista/7 or Windows Server
2008/2008 R2.
For details about logging in and out with administrator authentication, see p.22 "Using Web Image
Monitor to Configure Administrator Authentication".
1. Log in to Web Image Monitor as an administrator.
2. Click [Configuration] in the Menu area, and then click [Device Certificate] under "Security"
category.
3. Check the radio button next to the number of the certificate you want to install.
4. Click [Install].
5. Enter the contents of the device certificate.
In the Certificate box, enter the contents of the device certificate issued by the certificate authority.
6. Click [OK].
7. Wait a moment for the device to restart, and then click [OK].
"Installed" appears under "Certificate Status" to show that a device certificate for the printer has been
installed.
8. Click [Logout].
9. Close Web Image Monitor.
• If a certificate authority issues a certificate that must be authenticated by an intermediate certificate
authority,
and the certificate is installed on this printer, an intermediate certificate must be installed on
the client computer. Otherwise, validation by the certificate authority will not be performed correctly.
If validation cannot be performed properly, a warning message informing you that installation is not
possible might appear when you try to add a printer using IPP-SSL under Windows Vista/7 or
Windows Server 2008/2008 R2. A warning message might also appear if you attempt to access
this printer through Web Image Monitor with SSL enabled. To enable authentication from the client
computer, install the intermediate certificate on the client computer, and then reestablish connection.
• Intermediate certificates cannot be installed on this printer.
3. Configuring User Authentication
42
To Next Page
Loading...
Need help?
General