Ricoh Aficio SP 5200DN User Manual

Connecting to the standard Ethernet port
1. Connect the Ethernet cable to the Ethernet port.
CEC054
2. Connect the other end of the cable to the network, for example using a hub.
Connecting to the Ethernet port of the Gigabit Ethernet board
1. Attach the ferrite core to the Ethernet cable.
Attach the other ferrite core about 10 cm (4 inches) ( ) from this core making a loop as shown.
CBK089
2. Connect the Ethernet cable to the Ethernet port of the Gigabit Ethernet board.
CEC062
3. Connect the other end of the cable to the network, for example using a hub.
4. Connecting the Printer
70
4

Ricoh Aficio SP 5200DN Specifications

General

Brand	Ricoh
Model	Aficio SP 5200DN
Category	Printer
Language	English