P-2 About This Manual
PowerFlex® 755 Drive Embedded EtherNet/IP Adapter User Manual
Publication 750COM-UM001A-EN-P
Rockwell Automation
Support
Rockwell Automation, Inc. offers support services worldwide, with
over 75 sales/support offices, over 500 authorized distributors, and over
250 authorized systems integrators located through the United States
alone. In addition, Rockwell Automation, Inc. representatives are in
every major country in the world.
Local Product Support
Contact your local Rockwell Automation, Inc. representative for:
• Sales and order support
• Product technical training
• Warranty support
• Support service agreements
Technical Product Assistance
For technical assistance, please review the information in Chapter 7,
Troubleshooting
, first. If you still have problems, then access the
Allen-Bradley Technical Support web site at www.ab.com/support/
abdrives or contact Rockwell Automation, Inc.
Conventions Used in This
Manual
The following conventions are used throughout this manual:
• Parameter names are shown in the format Parameter xx - [*]. The
xx represents the parameter number. The * represents the parameter
name — for example Parameter 01 - [DL From Net Cfg 01].
• Menu commands are shown in bold type face and follow the format
Menu > Command. For example, if you read “Select File > Open,”
you should click the File menu and then click the Open command.
• The firmware release is displayed as FRN X.xxx. The “FRN”
signifies Firmware Release Number. The “X” is the major release
number. The “xxx” is the minor update number.
• RSLinx Classic (version 2.52), RSLogix 5 (version 7.20), RSLogix
500 (version 7.20), and RSLogix 5000 (version 16) were used for the
screen shots in this manual. Different versions of the software may
differ in appearance and procedures.
• This manual provides information about the EtherNet/IP adapter
embedded on the Main Control Board in PowerFlex 755 drives, and
using it for network communication.
To Next Page
Loading...
Need help?
General
