Rockwell Automation PowerFlex 755 Drive User Manual

8-6 Viewing the Adapter Web Pages
PowerFlex® 755 Drive Embedded EtherNet/IP Adapter User Manual
Publication 750COM-UM001A-EN-P
Configure E-mail
Notification Web Page
The Configure E-mail Notification web page contains selections and
data fields for configuring the adapter to automatically send e-mail
messages to desired addresses when selected types of events occur.
By default, settings are not protected. After configuration, settings can
be protected by using Parameter 53 - [Web Features] to set E-mail
Cfg Bit 0 value to “0” (Disabled). To change a protected configuration,
it must first be unprotected by setting the E-mail Cfg Bit 0 value back to
“1” (Enabled).
Figure 8.4 Example of Configure E-mail Notification Web Page
Configuring E-mail Notification
1. Click the desired DPI host check boxes corresponding to what you
want to occur that will send e-mail notification.
– If you only want e-mail notification when specific faults or
alarms occur, click this radio button and enter the fault or alarm
numbers in the box.
– If you only want e-mail notification when all faults or alarms
except specific faults or alarms occur, click this radio button
and enter the fault or alarm numbers in the box.
2. Click the communication fault and/or idle fault check box if you
want e-mail notification when these faults occur.

Rockwell Automation PowerFlex 755 Drive Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 755 Drive
Category	Adapter
Language	English