Suzuki Boulevard M50 User Manual

10-20 SERVICING INFORMATION
COOLING SYSTEM HOSE ROUTING
*1
Pass through the reservoir hose between frame and
throttle valve actuator.
*4 Set the hose with dent of engine case.
*2 Clamp the hose with frame and harness. A The end of the clamp should face...
*3 Be careful not to dent hose with frame cover.
Set the white mark.
)
left side.
)
left side.
)
left side.
Set the white mark.
Set the white mark.
)
left side.
)
out side.
Set the white mark.
)
left side.
Set the yellow mark.
Clearance
Match mark
Set the yellow mark.
Clamp from left side.
Set the white mark.
Clamp from back side.
Clamp from right side.
45˚
)
right side.
)
right side.
Set the white mark.
VIEW B
B
A
VIEW A
C
C
VIEW C
Clamp (small side)
Clamp (big side)
Set the white mark.
Set the cut-rib inside.
17.5 N
.
m
(1.75kgf-m, 12.5 lb-ft)
Set the yellow mark.
)
left side.
)
up side.
)
left side.
*1
*2
*3
*4
)
left side.
30˚
SAMPLE

Suzuki Boulevard M50 Specifications

General

Compression Ratio	9.4:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Transmission	5-speed constant mesh
Final Drive	Shaft drive
Front Suspension	Inverted telescopic, coil spring, oil damped
Front Tire	130/90-16M/C 67H, tubeless
Rear Tire	170/80-15M/C 77H, tubeless
Ground Clearance	140 mm (5.5 in)
Seat Height	700 mm (27.6 in)
Engine Type	4-stroke, liquid-cooled, V-twin
Bore x Stroke	83.0 mm x 74.4 mm
Rear Suspension	coil spring, oil damped
Front Brakes	Single hydraulic disc
Rear Brakes	Drum
Fuel Tank Capacity	15.5 L (4.1 US gal)
Wheelbase	1, 655 mm (65.2 in)