To Next Page

To Previous Page

ENGINE 3-63

PRIMARY DRIVE GEAR

PRIMARY DRIVE GEAR INSPECTION

Visually inspect the gear teeth for wear and damage. If they are

worn, replace the gear with a new one.

PRIMARY DRIVE GEAR DISASSEMBLY

• Disassemble the primary drive gear by removing the snap

ring

" 09900-06107: Snap ring pliers

1: Snap ring

2: Spring washer

3: Scissors gear

4: Spring

5: Primary drive gear

PRIMARY DRIVE GEAR REASSEMBLY

• Set the springs

1 into the grooves.

• Install the scissors gear

NOTE:

Align the holes of the primary drive gear and the scissors gear.

• Install the spring washer

3 not to cover the holes of the

gears.

NOTE:

The convex side of the washer faces upward.

Suzuki DL1000 Service Manual

Other manuals for Suzuki DL1000