6-28 CHASSIS
• Remove the steering stem lower bearing
8.
INSPECTION AND DISASSEMBLY
Inspect the removed parts for the following abnormalities.
* Handlebars distriction
* Race wear and brinelling
* Bearing wear or damage
* Abnormal bearing noise
* Distortion of the steering stem
If any abnormal points are found, replace defective parts with
the new ones.
• Remove the steering stem lower bearing inner race using a
chisel.
"
• Drive out the steering stem upper and lower bearing races
using the special tools.
# 09941-54911: Bearing outer race remover
09925-18011: Steering bearing installer
The removed bearing inner race and dust seal must be
replaced with the new ones.
To Next Page
Loading...
Need help?
General
