6-18 CHASSIS
INSPECTION
INNER AND OUTER TUBES
Inspect the inner tube outer surface and the outer tube inner sur-
face for scratches. If any defects are found, replace them with
the new ones.
FORK SPRING
Measure the fork spring free length. If it is shorter than the ser-
vice limit, replace it with a new one.
$ Front fork spring free length
Service limit: 442.0 mm (17.40 in)
DAMPER ROD
Move the inner rod by hand to examine it for smoothness. If any
defects are found, replace the inner/damper rod (cartridge).
To Next Page
Loading...
Need help?
General
