6-46 CHASSIS
SUSPENSION SETTING
After installing the rear suspension, adjust the spring pre-load
and damping force as follows.
SPRING PRE-LOAD ADJUSTMENT
The pre-load is adjusted by turning the pre-load adjuster knob
without tool.
Position “0” provides the softest spring pre-load.
Position “5” provides the stiffest spring pre-load.
STD position: “2”
DAMPING FORCE ADJUSTMENT
The rebound damping force is adjusted by turning the adjuster.
Fully turn the damping adjuster
1 clockwise. It is at stiffest posi-
tion and turn it out to standard setting position.
STD position: + turn out from stiffest position
"
STD position
2
0
1
Stiffest position
Softest position
0
2
1
3
4
5
0
Do not turn the adjuster more than the given position
or the adjuster may be damaged.
HH
SS
To Next Page
Loading...
Need help?
General
