CHASSIS 6-81
CLUTCH MASTER CYLINDER REMOVAL
AND DISASSEMBLY
• Remove the rear view mirror and clutch lever cover.
• Drain the clutch fluid. (!6-78)
• Disconnect the clutch lever position switch lead wires.
• Place a rag underneath the union bolt on the master cylinder
to catch spilled drops of brake fluid. Remove the union bolt
and disconnect the clutch hose from the master cylinder.
• Remove the clutch master cylinder.
"
• Remove the clutch lever
1 and clutch lever position switch
2.
• Remove the boot
3 and push rod
4.
• Remove the snap ring
5.
• Remove the piston/cup set
6 Secondary cup
7 Piston
8 Primary cup
9 Spring
Completely wipe off any brake fluid adhering to any
parts of motorcycle. The fluid reacts chemically with
paint, plastics, rubber materials, etc. and will damage
them severely.
To Next Page
Loading...
Need help?
General
