CHASSIS 6-77
CLUTCH RELEASE CYLINDER AND MASTER CYLINDER
CONSTRUCTION
(
"
* This clutch system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use or mix
different types of fluid such as silicone-based or petroleum-based.
* Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake
fluid left over from the last servicing or stored for long periods.
* When storing the brake fluid, seal the container completely and keep away from children.
* When replenishing brake fluid, take care not to get dust into fluid.
* When washing brake components, use fresh brake fluid. Never use cleaning solvent.
Handle brake fluid with care: the fluid reacts chemically with paint, plastics, rubber materials
etc. and will damage them sererly.
ITEM N·m kgf-m lb-ft
A
10 1.0 7.0
B
23 2.3 16.5
C
7.5 0.75 5.5
@
1
Diaphragm
2
Push rod
3
Dust boot
4
Piston/cup set
5
Clutch hose
6
Clutch push rod
7
Piston
8
Piston cup
9
Spring
0
Clutch release cylinder
A
Clutch master cylinder mounting bolt
B
Clutch hose union bolt
C
Air bleeder valve
To Next Page
Loading...
Need help?
General
