6-48 CHASSIS
REMOVAL
• Remove the exhaust pipe and exhaust muffler. (!3-7)
• Raise the rear wheel off the ground and support the motorcy-
cle with a jack or wooden block.
• Remove the rear wheel. (!6-34)
• Remove the rear brake hose guide
1.
• Remove the cushion rods
2.
• Remove the shock absorber
3.
• Remove the cushion lever
4.
• Remove the swingarm pivot shaft lock nut by using the spe-
cial tool.
# 09940-14940: Swingarm pivot thrust adjuster socket
wrench
• Hold the swingarm pivot shaft
5 and remove the swingarm
pivot nut
6.
• Remove the swingarm pivot shaft by using the special tool.
# 09944-28320: Hexagon bit 19 mm
• Remove the chain cover.