ENGINE 3-71
• Install the bearing retainers.
NOTE:
When installing the bearing retainers, apply THREAD LOCK to
the screws.
% 09900-32050: THREAD LOCK “1342”
• Install the oil seals with the special tool.
" 09913-70210: Bearing installer set
• Install the oil seal retainer.
CRANKCASE-CRANKSHAFT BEARING
CRANKCASE-CRANKSHAFT BEARING INSPECTION
• Inspect the crankshaft journal bearings for any damage. If
any, replace them with a specified set of bearings.
• Inspect the crankshaft journal for any damage.
• Measure the crankshaft journal O.D. with the special tool.
& Crankshaft journal O.D.
Standard: 47.985 – 48.000 mm (1.8892 – 1.8898 in)
" 09900-20202: Micrometer (25 – 50 mm)
To Next Page
Loading...
Need help?
General
