PERIODIC MAINTENANCE 2-15
MAJOR ADJUSTMENT
• Remove the fuel tank. (!4-52)
• Remove the air cleanet box. (!4-60)
• Loosen the locknut
1 of the throttle returning cable.
• Turn the returning cable adjuster
2 to obtain proper cable
play.
• Loosen the locknut
3 of the throttle pulling cable.
• Turn the pulling cable adjuster
4 in or out until the throttle
cable play
A should be 2.0 – 4.0 mm (0.08 – 0.16 in) at the
throttle grip.
• Tighten the locknut
3 securely while holding the adjuster
4.
%'Throttle cable play
A: 2.0 – 4.0 mm (0.08 – 0.16 in)
• While holding the throttle grip at the fully closed position,
slowly turn the returning cable adjuster
2 to obtain a slack of
1.0 mm (0.04 in).
• Tighten the locknut
1 securely.
#
THROTTLE VALVE SYNCHRONIZATION
(!4-72)
PAIR (AIR SUPPLY) SYSTEM
(!9-6)
After the adjustment is completed, cheack that han-
dlebar movement does not raise the engine idle speed
and that the throttle grip returns smoothly and auto-
matically.
Inspect every 12 000 km (7 500 miles, 12 months).
Inspect every 12 000 km (7 500 miles, 12 months).
To Next Page
Loading...
Need help?
General
