COOLING AND LUBRICATION SYSTEM 5-19
• Remove the oil cooler fin guard net.
• Remove the oil hoses.
INSPECTION AND CLEANING
• Inspect the oil cooler and hose joints for oil leakage. If any
defect are found, replace the oil cooler and oil hoses with the
new ones.
• Road dirt or trash stuck to the fins must be removed.
• Use of compressed air is recommended for this cleaning.
• Fins bent down or dented can be repaired by straightening
them with the blade of a small screwdriver.
INSTALLATION
• Install a new gasket washer
1.
!
• Install the oil cooler.
$ Oil cooler mounting bolt: 10 N·m (1.0 kgf-m, 7.3 lb-ft)
• Tighten the oil cooler hose union bolts to the specified torque.
$ Oil cooler hose union bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Use a new gasket washer to prevent engine oil leak-
age.
To Next Page
Loading...
Need help?
General
