5-34 CHASSIS
VALVE
Inspect the valve 1 for damage.
If the seal rubber is peeling or damaged, replace the valve with
a new one.
NOTE:
If the external appearance of the valve shows no abnormal con-
dition, removing the valve is not necessary.
Inspect the valve core seal 2 for deformation or damage.
If the valve core seal has abnormal deformation, replace the
valve with a new one.
INSTALLATION
VALVE
Clean any dust or rust around the valve hole 1.
Install the valve in the rim.
NOTE:
To properly install the valve
2
into the valve hole, apply a spe-
cial tire lubricant or neutral soapy liquid to the valve.
Be careful not to damage the valve lip A.
B Wheel
To Next Page
Loading...
Need help?
General
