3-28 ENGINE
RIGHT CRANKSHAFT BEARING
Remove the right crankshaft bearings using the special tools.
09923-73210: Bearing remover
09930-30102: Sliding hammer
Replace the removed bearing with a new one.
Install the right crankshaft bearing using the special tool.
09913-70210: Bearing installer set
LEFT CRANKSHAFT BEARING
Remove the left crankshaft bearing using the special tools.
09923-74510: Bearing remover
09930-30102: Sliding hammer
Replace the removed bearing with a new one.
Install the left crankshaft bearing using the special tool.
09913-70210: Bearing installer set
OIL SEALS
Damage to the lip of the oil seal may result in leakage of the air-
fuel mixture or gear oil. Inspect the oil seal and if it is damaged,
replace it with a new one.
To Next Page
Loading...
Need help?
General
