AudioCodes Mediant 500L MSBR User Manual

User's Manual 17. Media
Version 6.8 201 Mediant 500L MSBR
3. When using AGC with the SBC application, the 'Transcoding Mode'
(TranscodingMode) parameter must be set to Force. This parameter can either be the
global parameter or per IP Profile.
4. Click Submit.
17.5 Configuring Various Codec Attributes
The following codec attribute settings can be configured in the General Media Settings
page:

AMR coder:
• 'Payload Format': Defines the AMR payload format type.

SILK coder (Skype's default audio codec):
• 'Silk Tx Inband FEC': Enables forward error correction (FEC) for the SILK coder.
• 'Silk Max Average Bit Rate': Defines the maximum average bit rate for the SILK
coder.
For a detailed description of these parameters and for additional codec parameters, see
''Coder Parameters'' on page 878.
 To configure codec attributes:
1. Open the General Media Settings page (Configuration tab > VoIP menu > Media >
General Media Settings).
Figure 17-7: Codec Settings in General Media Settings Page
2. Configure the parameters as required, and then click click Submit.
3. To save the changes to flash memory, see ''Saving Configuration'' on page 606.

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English