User's Manual 828 Document #: LTRT-10466
Mediant 500L MSBR
67.6 Control Network Parameters
67.6.1 IP Group, Proxy, Registration and Authentication Parameters
The proxy server, registration and authentication SIP parameters are described in the table
below.
Table 67-30: Proxy, Registration and Authentication SIP Parameters
Parameter Description
IP Group Table
Web: IP Group Table
EMS: Endpoints > IP Group
CLI: configure voip > voip-network
ip-group
[IPGroup]
This table configures IP Groups.
The ini file format of this parameter is as follows:
[ IPGroup ]
FORMAT IPGroup_Index = IPGroup_Type,
IPGroup_Description, IPGroup_ProxySetId,
IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SipReRoutingMode,
IPGroup_AlwaysUseRouteTable, IPGroup_RoutingMode,
IPGroup_SRD, IPGroup_MediaRealm,
IPGroup_ClassifyByProxySet, IPGroup_ProfileId,
IPGroup_MaxNumOfRegUsers, IPGroup_InboundManSet,
IPGroup_OutboundManSet, IPGroup_RegistrationMode,
IPGroup_AuthenticationMode, IPGroup_MethodList,
IPGroup_EnableSBCClientForking, IPGroup_SourceUriInput,
IPGroup_DestUriInput, IPGroup_ContactName,
IPGroup_Username, IPGroup_Password,
IPGroup_UUIFormat, IPGroup_QOEProfile,
IPGroup_BWProfile, IPGroup_MediaEnhancementProfile,
IPGroup_AlwaysUseSourceAddr;
[/IPGroup]
For a description of this table, see ''Configuring IP Groups'' on
page 287.
Note: For this parameter to take effect, a device reset is
required.
Authentication per Port Table
Web: Authentication Table
EMS: SIP Endpoints >
Authentication
CLI: configure voip/gw analoggw
authentication
[Authentication]
This table parameter defines a user name and password for
authenticating each device port. The format of the ini file table
parameter is as follows:
[Authentication]
FORMAT Authentication_Index = Authentication_UserId,
Authentication_UserPassword, Authentication_Module,
Authentication_Port;
[\Authentication]
Where,
ï‚§ Module = Module number, where 1 denotes the module in
Slot 1
ï‚§ Port = Port number, where 1 denotes the Port 1 of the
module
For example:
Authentication 1 = lee,1552,1,2; (user name "lee" with
password 1552 for authenticating Port 2 of Module 1)