AudioCodes Mediant 500L MSBR User Manual

User's Manual 914 Document #: LTRT-10466
Mediant 500L MSBR
67.10.5.4 Message Waiting Indication Parameters
The message waiting indication (MWI) parameters are described in the table below.
Table 67-45: MWI Parameters
Parameter Description
Web: Enable MWI
EMS: MWI Enable
CLI: enable-mwi
[EnableMWI]
Enables Message Waiting Indication (MWI).
 [0] Disable (default).
 [1] Enable
Notes:
 This parameter is applicable only to FXS interfaces.
 The device supports only the receipt of SIP MWI NOTIFY
messages (the device doesn't generate these messages).
 For more information on MWI, see ''Message Waiting
Indication'' on page 444.
Web/EMS: MWI Analog Lamp
CLI: mwi-analog-lamp
[MWIAnalogLamp]
Enables the visual display of MWI.
 [0] Disable (default).
 [1] Enable = Enables visual MWI by supplying line voltage
of approximately 100 VDC to activate the phone's lamp.
Notes:
 This parameter is applicable only for FXS interfaces.
 This parameter can also be configured in a Tel Profile.
Web/EMS: MWI Display
CLI: enable-mwi
[MWIDisplay]
Enables sending MWI information to the phone display.
 [0] Disable = (Default) MWI information isn't sent to display.
 [1] Enable = The device generates an MWI message
(determined by the parameter CallerIDType), which is
displayed on the MWI display.
Note:
 This parameter is applicable only to FXS interfaces.
 This parameter can also be configured in a Tel Profile.
Web: Subscribe to MWI
EMS: Enable MWI Subscription
CLI: subscribe-to-mwi
[EnableMWISubscription]
Enables subscription to an MWI server.
 [0] No (default)
 [1] Yes
Notes:
 To configure the MWI server address, use the MWIServerIP
parameter.
 To configure whether the device subscribes per endpoint or
per the entire device, use the parameter SubscriptionMode.
Web: MWI Server IP Address
EMS: MWI Server IP
CLI: mwi-srvr-ip-addr
[MWIServerIP]
Defines the MWI server's IP address. If provided, the device
subscribes to this IP address. The MWI server address can be
configured as a numerical IP address or as a domain name. If
not configured, the Proxy IP address is used instead.

AudioCodes Mediant 500L MSBR Specifications

General

Brand	AudioCodes
Model	Mediant 500L MSBR
Category	Network Router
Language	English