User's Manual 254 Document #: LTRT-10466
Mediant 500L MSBR
Parameter Description
Default Minute Cost
CLI: default-minute-cost
[CostGroupTable_DefaultMinuteCost]
Defines the call charge per minute for a call outside
the time bands.
The valid value range is 0-65533. The default is 0.
Note: When calculating the cost of a call, if the
current time of the call is not within a time band
configured for the Cost Group, then this default
charge per minute is used.
18.5.2.3 Configuring Time Bands for Cost Groups
The Time Band table lets you configure Time Bands per Cost Group. A Time Band defines
a day and time range (e.g., from Saturday 05:00 to Sunday 24:00), as well as the fixed call
connection charge and call rate per minute for this interval. You can configure up to 70
Time Bands, where up to 21 Time Bands can be assigned to each Cost Group.
Note: You cannot configure overlapping Time Bands.
The following procedure describes how to configure Time Bands per Cost Group in the
Web interface. You can also configure this using the table ini file parameter,
CostGroupTimebands or CLI command, configure voip >services least-cost-routing cost-
group-time-bands.
 To configure a Time Band per Cost Group:
1. Open the Cost Group Table page (Configuration tab > VoIP menu > Services >
Least Cost Routing > Cost Group Table).
2. Select a Cost Group for which you want to assign Time Bands, and then click the
Time Band link located below the table; the Time Band table for the selected Cost
Group appears.
3. Click Add; the following dialog box appears:
4. Configure a Time Band according to the parameters described in the table below.
5. Click Submit, and then save ("burn") your settings to flash memory.
Table 18-16: Time Band Table Description
Parameter Description
Index
CLI: timeband-index
Defines an index number for the new table record.
Note: Each table row must be configured with a unique
To Next Page
Loading...
Need help?
General
